Attenlyx Upload
Attenlyx Upload

upload.attenlyx.ai/capture-guide

Back

Capture guide

Settings for recording and uploading event footage. Check them before the event starts.

Video

Codec
Record in H.265/HEVC; if the camera cannot, use H.264. Do not use AV1 or VP9.
Resolution
1920x1080, never lower.
Frame rate
25 fps.
Bitrate
HEVC 5-6 Mbps; H.264 8-10 Mbps.
Camera audio
Leave on, AAC stereo 128 kbps.

PA audio feed

Format
Record the PA feed as one continuous WAV file.
Sample rate
48 kHz.
Bit depth
16-bit.
Source
Taken from the mixer.

Camera setup

  • Leave camera chunking on.
  • Set all camera clocks to the same time and make one sync clap at the start.
  • Fixed exposure.
  • No digital zoom.
  • Face the audience.
  • Avoid backlight.
  • Light the audience at evening rallies.

Uploading

  • Accepted formats: .mp4, .mov (video) and .wav, .mp3, .m4a (audio, PA feed only).
  • Maximum 50 GB per file.
  • Tag every file with camera number, camera position and recording start time.
  • Upload each finished chunk while the event is running.
  • Wait for the status Received before you leave.
Files outside these settings are still accepted but will show a warning.